The modelFoxy
The first of the Friendly Hill friends. Started November 21 at 5:20 pm, about 12 hours and 185 grams.
- 1 Red to orange
- 2 Chocolate
- 3 Light coffee beige
- 4 White
A Bambu Lab P1S, a shelf full of filament and the little friends coming off the plate. The shelf below is the real inventory: what I have, what’s loaded and what’s still sealed.
The filament shelf
One spool, one book. Tap any of them to see what it is, where it came from and what it’s for. The shrink-wrapped ones are still sealed, and the dashed gaps are out in the AMS.
Colors the shelf doesn’t have yet, and what they’re for.
| Color | Brand and line | Plastic | How many | Shelf |
|---|---|---|---|---|
| White | ZIRO Matte PLA | PLA | 1 in the AMS, 3 on the shelf | Whites |
| White | MarsWork Matte PLA, Quick-Swap reusable spool | PLA | 1 open | Whites |
| White | Make Market Matte PLA | PLA | 1 on the shelf | Whites |
| Pearl white | Amoybaby Silk PLA | PLA | 1 on the shelf | Whites |
| White | Bambu Lab PLA refill | PLA | 1 on the shelf | Whites |
| Black | ZIRO Matte PLA | PLA | 1 open, 1 sealed | Blacks & grays |
| Black | OVERTURE Matte PLA | PLA | 1 on the shelf | Blacks & grays |
| Gray | ZIRO Matte PLA | PLA | 1 open | Blacks & grays |
| Chocolate | OVERTURE PLA Plus (PLA+) | PLA+ | 1 in the AMS | Browns & wood |
| Wood brown | Polymaker PolyTerra PLA | PLA | 1 on the shelf | Browns & wood |
| Light coffee beige | iSANMATE High Speed Matte PLA | PLA | 1 in the AMS | Browns & wood |
| Wood grain | ZIRO Matte PLA | PLA | 1 on the shelf | Browns & wood |
| Orange | PLA | PLA | 2 on the shelf | Oranges & reds |
| Red | OVERTURE Matte PLA | PLA | 1 on the shelf | Oranges & reds |
| Cyan | MarsWork PLA Basic | PLA | 1 open | Blues & greens |
| Blue | OVERTURE Matte PLA | PLA | 1 on the shelf | Blues & greens |
| Blue | ZIRO PLA PRO | PLA | 1 open | Blues & greens |
| Glow green | DURAMIC PLA Glow in the Dark | PLA | 1 open | Blues & greens |
| Red to orange | iSANMATE Gradient PLA+ | PLA+ | 1 in the AMS | Rainbows |
| Pink, green, blue | iSANMATE Rainbow Matte PLA | PLA | 1 on the shelf | Rainbows |
| Clear | OVERTURE PETG | PETG | 1 open, 1 sealed | PETG |
| Black | OVERTURE PETG | PETG | 1 on the shelf | PETG |
The AMS
The AMS holds four spools and switches between them on its own, so one print can have four colors.
Updated .
Prints
The Friendly Hill friends and the Yeti, each made for four AMS slots. These are the models; photos of the real prints go here as they come off the plate.
The modelThe first of the Friendly Hill friends. Started November 21 at 5:20 pm, about 12 hours and 185 grams.
The modelUp next. Only slot 1 changes: red-to-orange out, black in.
The modelEvery color is on the shelf, red scarf and little white heart included.
The modelReady with orange spikes; yellow is the color as drawn.
Drawn with yellow, which isn’t on the shelf yet.
Spin it in 3D
The modelReady in glow green with white wings and orange spikes; mint and yellow are the colors as drawn.
Drawn with mint and yellow, which aren’t on the shelf yet.
Spin it in 3DThe print log
Straight from my Bambu Lab account, newest first: keychains, cake toppers, a lot of Minecraft and now the Friendly Hill friends.
From my Bambu Lab print history, read . Times are Bambu’s estimates for each print. Bambu’s history only reaches back to August 30, 2026, so my prints from the spring and summer aren’t in it.
Designs
The journey
A first look: an A1 mini sat in my Bambu Lab cart.
I ordered a Bambu Lab P1S Combo: the printer and the AMS, which holds four spools and switches colors on its own.
The shelf filled up: ZIRO, OVERTURE, iSANMATE and MarsWork, mostly from Amazon, one white from Michaels.
The first print in my Bambu history: Minecraft TNT keychains, about ten hours on the plate. Every print since
My busiest month so far: 33 prints, twelve of them plates of a Large Minecraft Steve.
My longest print yet: mini howling wolves, about 43 hours.
Claude turned the Friendly Hill friends and the Yeti into figures made for my four AMS slots, with no supports to snap off. See them
Claude set up Bambu Studio on my iMac and sent Foxy to the printer: our first figure, about twelve hours on the plate.
This page, with every spool on one shelf.
For Claude, too
Everything on this page comes from one file, library.json. Claude reads it before it designs a figure or sends one to the printer, so every design uses colors I actually have.
When a spool runs out, a new one arrives or something comes off the plate, I tell Claude, and it updates the file and this page.
One essay every Saturday
Every Saturday morning I send one short essay on optimism, purpose, and enough. Free, three minutes.