{
  "about": "Travis Hellstrom's 3D printing inventory: every spool of filament on his shelf, what is loaded in the AMS, what he has printed and what he wants to print. It is the source of travishellstrom.com/3d/ (scripts/build-3d.py writes the page from it) and the list Claude reads before designing or printing anything. Spool states: sealed (still shrink-wrapped from the factory; Travis keeps opened spools in storage bags, and a bag does not mean sealed), open (in use, on the shelf), shelf (opened, on the shelf in a storage bag, not known how much is left), ams (loaded in the AMS; slot says which), empty (used up, kept for the record).",
  "updated": "2026-11-22",
  "printer": {
    "name": "Bambu Lab P1S",
    "with": "AMS, four slots",
    "ordered": "2026-04-11",
    "nozzle": "0.4 mm",
    "plate": "Textured PEI",
    "software": "Bambu Studio on the iMac"
  },
  "families": [
    {"key": "whites", "name": "Whites"},
    {"key": "blacks", "name": "Blacks & grays"},
    {"key": "browns", "name": "Browns & wood"},
    {"key": "warm", "name": "Oranges & reds"},
    {"key": "cool", "name": "Blues & greens"},
    {"key": "rainbow", "name": "Rainbows"},
    {"key": "petg", "name": "PETG"}
  ],
  "spools": [
    {"id": "ziro-matte-white", "family": "whites", "color": "White", "brand": "ZIRO", "line": "Matte PLA", "material": "PLA", "finish": "matte", "hex": "#efede6", "flange": "black",
     "spools": [{"state": "ams", "slot": 4, "likely": true}, {"state": "shelf"}, {"state": "shelf"}, {"state": "shelf"}],
     "from": "Amazon, four orders (April, June, July)", "photo": "ziro-matte-white", "buy": "ZIRO matte PLA white 1.75mm", "note": "The go-to white. The white in the AMS is most likely this one."},
    {"id": "marswork-matte-white", "family": "whites", "color": "White", "brand": "MarsWork", "line": "Matte PLA, Quick-Swap reusable spool", "material": "PLA", "finish": "matte", "hex": "#f1f0ec", "flange": "white",
     "spools": [{"state": "open"}], "from": "Amazon, May", "photo": "marswork-matte-white", "buy": "MarsWork matte PLA white 1.75mm"},
    {"id": "make-market-matte-white", "family": "whites", "color": "White", "brand": "Make Market", "line": "Matte PLA", "material": "PLA", "finish": "matte", "hex": "#ecebe5", "flange": "black",
     "spools": [{"state": "shelf"}], "from": "Michaels, July", "photo": "make-market-matte-white"},
    {"id": "amoybaby-silk-white", "family": "whites", "color": "Pearl white", "brand": "Amoybaby", "line": "Silk PLA", "material": "PLA", "finish": "silk", "hex": "#f6f1e4", "flange": "black",
     "spools": [{"state": "shelf"}], "from": "Amazon, June", "photo": "amoybaby-silk-white", "buy": "Amoybaby silk PLA white 1.75mm", "note": "Shiny, not matte."},
    {"id": "bambu-refill-white", "family": "whites", "color": "White", "brand": "Bambu Lab", "line": "PLA refill", "material": "PLA", "finish": "basic", "hex": "#f3f3f0", "flange": "refill",
     "spools": [{"state": "shelf"}], "from": "", "photo": "bambu-refill-white", "buy": "Bambu Lab PLA refill white", "note": "A refill: the filament without a spool, to wind onto a reusable one."},
    {"id": "ziro-matte-black", "family": "blacks", "color": "Black", "brand": "ZIRO", "line": "Matte PLA", "material": "PLA", "finish": "matte", "hex": "#1d1d1f", "flange": "black",
     "spools": [{"state": "open"}, {"state": "sealed"}], "from": "Amazon, April and May", "buy": "ZIRO matte PLA black 1.75mm", "note": "Oxy's slot 1."},
    {"id": "overture-matte-black", "family": "blacks", "color": "Black", "brand": "OVERTURE", "line": "Matte PLA", "material": "PLA", "finish": "matte", "hex": "#232427", "flange": "cardboard",
     "spools": [{"state": "shelf"}], "from": "", "photo": "overture-matte-black", "buy": "OVERTURE matte PLA black 1.75mm"},
    {"id": "ziro-matte-gray", "family": "blacks", "color": "Gray", "brand": "ZIRO", "line": "Matte PLA", "material": "PLA", "finish": "matte", "hex": "#8e9092", "flange": "black",
     "spools": [{"state": "open"}], "from": "Amazon, April", "photo": "ziro-matte-gray", "buy": "ZIRO matte PLA gray 1.75mm"},
    {"id": "overture-chocolate", "family": "browns", "color": "Chocolate", "brand": "OVERTURE", "line": "PLA Plus (PLA+)", "material": "PLA+", "finish": "basic", "hex": "#4b2e20", "flange": "cardboard",
     "spools": [{"state": "ams", "slot": 2}], "from": "Amazon, April", "photo": "overture-chocolate", "buy": "OVERTURE PLA Plus chocolate 1.75mm", "note": "Foxy's and Oxy's dark brown."},
    {"id": "polyterra-wood-brown", "family": "browns", "color": "Wood brown", "brand": "Polymaker", "line": "PolyTerra PLA", "material": "PLA", "finish": "matte", "hex": "#8a5a36", "flange": "cardboard",
     "spools": [{"state": "shelf"}], "from": "", "photo": "polyterra-wood-brown", "buy": "Polymaker PolyTerra PLA wood brown"},
    {"id": "isanmate-light-coffee-beige", "family": "browns", "color": "Light coffee beige", "brand": "iSANMATE", "line": "High Speed Matte PLA", "material": "PLA", "finish": "matte", "hex": "#d9b48a", "flange": "white",
     "spools": [{"state": "ams", "slot": 3}], "from": "Amazon, April", "photo": "isanmate-light-coffee-beige", "buy": "iSANMATE high speed matte PLA light coffee beige", "note": "Foxy's cheeks, ears and tongue, in place of pink."},
    {"id": "ziro-wood-grain", "family": "browns", "color": "Wood grain", "brand": "ZIRO", "line": "Matte PLA", "material": "PLA", "finish": "multi", "hexes": ["#c9a273", "#8a5a36", "#b98a55"], "flange": "black",
     "spools": [{"state": "shelf"}], "from": "Amazon, April", "photo": "ziro-wood-grain", "buy": "ZIRO matte PLA wood grain", "note": "A wood-look gradient."},
    {"id": "orange-pla", "family": "warm", "color": "Orange", "brand": "", "line": "PLA", "material": "PLA", "finish": "basic", "hex": "#f26a1b", "flange": "clear",
     "spools": [{"state": "shelf"}, {"state": "shelf"}], "from": "", "photo": "orange-pla", "buy": "orange PLA filament 1.75mm", "note": "Plain orange, for spikes and the like. The brand isn't on the order emails."},
    {"id": "overture-matte-red", "family": "warm", "color": "Red", "brand": "OVERTURE", "line": "Matte PLA", "material": "PLA", "finish": "matte", "hex": "#cf2f2a", "flange": "cardboard",
     "spools": [{"state": "shelf"}], "from": "", "photo": "overture-matte-red", "buy": "OVERTURE matte PLA red 1.75mm", "note": "The Yeti's scarf."},
    {"id": "marswork-cyan", "family": "cool", "color": "Cyan", "brand": "MarsWork", "line": "PLA Basic", "material": "PLA", "finish": "basic", "hex": "#36b6d8", "flange": "white",
     "spools": [{"state": "open"}], "from": "Amazon, April", "photo": "marswork-cyan", "buy": "MarsWork PLA cyan 1.75mm", "note": "The Yeti's ice blue."},
    {"id": "overture-matte-blue", "family": "cool", "color": "Blue", "brand": "OVERTURE", "line": "Matte PLA", "material": "PLA", "finish": "matte", "hex": "#5a8fd0", "flange": "cardboard",
     "spools": [{"state": "shelf"}], "from": "", "photo": "overture-matte-blue", "buy": "OVERTURE matte PLA blue 1.75mm", "note": "Dinosaury's blue."},
    {"id": "ziro-pro-blue", "family": "cool", "color": "Blue", "brand": "ZIRO", "line": "PLA PRO", "material": "PLA", "finish": "basic", "hex": "#1f4fc0", "flange": "black",
     "spools": [{"state": "open"}], "from": "", "photo": "ziro-pro-blue", "buy": "ZIRO PLA PRO blue 1.75mm"},
    {"id": "duramic-glow-green", "family": "cool", "color": "Glow green", "brand": "DURAMIC", "line": "PLA Glow in the Dark", "material": "PLA", "finish": "glow", "hex": "#9ad26b", "glow": "#b7ff8a", "flange": "black",
     "spools": [{"state": "open"}], "from": "Amazon, February", "buy": "DURAMIC glow in the dark PLA green", "note": "Glows in the dark. Dragondy would glow at night."},
    {"id": "isanmate-gradient-red-orange", "family": "rainbow", "color": "Red to orange", "brand": "iSANMATE", "line": "Gradient PLA+", "material": "PLA+", "finish": "multi", "hexes": ["#d9262b", "#f47a20", "#f5a623"], "flange": "white",
     "spools": [{"state": "ams", "slot": 1}], "from": "Amazon, April", "photo": "isanmate-gradient-red-orange", "buy": "iSANMATE gradient PLA+ red orange", "note": "The color shifts along the spool. It's in the AMS for Foxy, so Foxy fades from red to orange."},
    {"id": "isanmate-rainbow-pastel", "family": "rainbow", "color": "Pink, green, blue", "brand": "iSANMATE", "line": "Rainbow Matte PLA", "material": "PLA", "finish": "multi", "hexes": ["#f4a6c6", "#9fe0a8", "#8fc5f0"], "flange": "black",
     "spools": [{"state": "shelf"}], "from": "Amazon, April", "photo": "isanmate-rainbow-pastel", "buy": "iSANMATE rainbow matte PLA pink green blue", "note": "Pastel colors that shift along the spool."},
    {"id": "overture-petg-clear", "family": "petg", "color": "Clear", "brand": "OVERTURE", "line": "PETG", "material": "PETG", "finish": "clear", "hex": "#e8f1f4", "flange": "cardboard",
     "spools": [{"state": "open"}, {"state": "sealed"}], "from": "Amazon, April and May", "photo": "overture-petg-clear", "buy": "OVERTURE PETG transparent 1.75mm", "note": "PETG doesn't stick to PLA, so it never shares a print with the figures."},
    {"id": "overture-petg-black", "family": "petg", "color": "Black", "brand": "OVERTURE", "line": "PETG", "material": "PETG", "finish": "basic", "hex": "#151618", "flange": "cardboard",
     "spools": [{"state": "shelf"}], "from": "Amazon, May", "photo": "overture-petg-black", "buy": "OVERTURE PETG black 1.75mm"}
  ],
  "wishlist": [
    {"id": "yellow", "color": "Yellow", "hex": "#f5c518", "why": "Spikes for Dinosaury and Dragondy.", "buy": "matte PLA yellow 1.75mm"},
    {"id": "pink", "color": "Pink", "hex": "#f4a3b5", "why": "Cheeks and ears, the way the friends are drawn.", "buy": "matte PLA pink 1.75mm"},
    {"id": "mint", "color": "Mint", "hex": "#a8e6c1", "why": "Dragondy's wings and snout.", "buy": "matte PLA mint green 1.75mm"}
  ],
  "prints": [
    {"id": "foxy", "name": "Foxy", "status": "printing", "date": "2026-11-21", "detail": "The first of the Friendly Hill friends. Started November 21 at 5:20 pm, about 12 hours and 185 grams.", "ends": "2026-11-22T05:35:00-05:00",
     "slots": ["isanmate-gradient-red-orange", "overture-chocolate", "isanmate-light-coffee-beige", "ziro-matte-white"], "model": "foxy", "link": "/figures/", "photos": []},
    {"id": "oxy", "name": "Oxy", "status": "next", "detail": "Up next. Only slot 1 changes: red-to-orange out, black in.",
     "slots": ["ziro-matte-black", "overture-chocolate", "isanmate-light-coffee-beige", "ziro-matte-white"], "model": "oxy", "link": "/figures/", "photos": []},
    {"id": "yeti", "name": "The Yeti", "status": "ready", "detail": "Every color is on the shelf, red scarf and little white heart included.",
     "slots": ["ziro-matte-white", "marswork-cyan", "overture-matte-red", "ziro-matte-black"], "model": "yeti", "link": "/figures/", "photos": []},
    {"id": "dinosaury", "name": "Dinosaury", "status": "ready", "detail": "Ready with orange spikes; yellow is the color as drawn.",
     "slots": ["overture-matte-blue", "ziro-matte-white", "orange-pla", "ziro-matte-black"], "wants": ["yellow"], "model": "dinosaury", "link": "/figures/", "photos": []},
    {"id": "dragondy", "name": "Dragondy", "status": "ready", "detail": "Ready in glow green with white wings and orange spikes; mint and yellow are the colors as drawn.",
     "slots": ["duramic-glow-green", "ziro-matte-white", "orange-pla", "ziro-matte-black"], "wants": ["mint", "yellow"], "model": "dragondy", "link": "/figures/", "photos": []}
  ],
  "designs": [
    {"name": "The Friendly Hill friends and the Yeti", "by": "Made for us by Claude", "url": "/figures/", "text": "Foxy, Oxy, Dragondy and Dinosaury from the stories my son and I make up, and the Yeti from Yeti mode. Spin them in 3D and download each one for Bambu Studio."},
    {"name": "MatMire Makes", "by": "A designer I support", "url": "https://matmiremakes.com/", "text": "Print-in-place animals with joints that move. I pay for his designs, and he has a really wonderful fox."}
  ],
  "history": {
    "source": "My Bambu Lab print history, read in Bambu Studio on the iMac",
    "read": "2026-11-21",
    "note": "Newest first, as Bambu lists them. est is Bambu's estimated print time; status done (finished), stopped (cancelled), printing. Model titles are tidied; a name on a name sign is left out.",
    "items": [
      {"date": "2026-11-21", "time": "17:20", "name": "Foxy", "est": "12.2h", "status": "printing", "link": "#print-foxy"},
      {"date": "2026-11-16", "time": "08:03", "name": "Christmas coasters", "est": "6.8h", "status": "done"},
      {"date": "2026-11-15", "time": "18:59", "name": "Snowflake candle holder", "est": "3.6h", "status": "done"},
      {"date": "2026-11-15", "time": "18:59", "name": "Snowflake candle holder", "est": "21s", "status": "stopped"},
      {"date": "2026-10-29", "time": "15:30", "name": "Mini howling wolves", "est": "42.8h", "status": "done"},
      {"date": "2026-10-28", "time": "18:59", "name": "Mini howling wolves", "est": "3.9h", "status": "stopped"},
      {"date": "2026-10-25", "time": "12:35", "name": "Nine-tailed fox", "est": "4.7h", "status": "done"},
      {"date": "2026-10-17", "time": "15:57", "name": "Large Minecraft Steve", "part": "Body", "est": "15.5h", "status": "done"},
      {"date": "2026-10-16", "time": "07:26", "name": "Large Minecraft Steve", "part": "Legs", "est": "6.9h", "status": "done"},
      {"date": "2026-10-15", "time": "14:51", "name": "Large Minecraft Steve", "part": "Body", "est": "15.3h", "status": "done"},
      {"date": "2026-10-15", "time": "12:00", "name": "Mini Minecraft cube", "est": "1.5h", "status": "done"},
      {"date": "2026-10-15", "time": "08:05", "name": "Large Minecraft Steve", "part": "Pickaxe", "est": "41min", "status": "done"},
      {"date": "2026-10-15", "time": "07:23", "name": "Large Minecraft Steve", "part": "Sword", "est": "38min", "status": "done"},
      {"date": "2026-10-13", "time": "21:57", "name": "Large Minecraft Steve", "part": "Head", "est": "25.1h", "status": "done"},
      {"date": "2026-10-12", "time": "14:09", "name": "Large Minecraft Steve", "part": "Neck", "est": "29min", "status": "done"},
      {"date": "2026-10-12", "time": "09:14", "name": "Large Minecraft Steve", "part": "Tools", "est": "3.6h", "status": "done"},
      {"date": "2026-10-11", "time": "17:41", "name": "Large Minecraft Steve", "part": "Pickaxe", "est": "2.4h", "status": "done"},
      {"date": "2026-10-11", "time": "17:01", "name": "Hanging cat bookmark", "est": "17min", "status": "done"},
      {"date": "2026-10-11", "time": "16:39", "name": "Hanging cat bookmark", "est": "21min", "status": "done"},
      {"date": "2026-10-11", "time": "14:59", "name": "AMS desiccant tray", "est": "1.5h", "status": "done"},
      {"date": "2026-10-11", "time": "10:08", "name": "Name sign for a desk", "est": "1.5h", "status": "done"},
      {"date": "2026-10-11", "time": "10:06", "name": "Name sign for a desk", "est": "44s", "status": "stopped"},
      {"date": "2026-10-09", "time": "14:53", "name": "Minecraft mini block keychains", "est": "5.8h", "status": "done"},
      {"date": "2026-10-09", "time": "07:25", "name": "Minecraft mini block keychains", "est": "4.6h", "status": "done"},
      {"date": "2026-10-08", "time": "21:16", "name": "Minecraft mini block keychains", "est": "4.3h", "status": "done"},
      {"date": "2026-10-08", "time": "18:33", "name": "Minecraft mini block keychains", "est": "2.5h", "status": "done"},
      {"date": "2026-10-08", "time": "07:44", "name": "Minecraft TNT keychains", "est": "10.2h", "status": "done"},
      {"date": "2026-10-07", "time": "18:24", "name": "Minecraft TNT keychains", "est": "10.2h", "status": "done"},
      {"date": "2026-10-07", "time": "07:32", "name": "Large Minecraft Steve", "part": "Pickaxe", "est": "2.4h", "status": "done"},
      {"date": "2026-10-06", "time": "16:28", "name": "Large Minecraft Steve", "part": "Plate 1", "est": "5.3h", "status": "done"},
      {"date": "2026-10-06", "time": "07:38", "name": "Large Minecraft Steve", "part": "Sword", "est": "4.8h", "status": "done"},
      {"date": "2026-10-05", "time": "20:30", "name": "Diamond sword", "est": "1.4h", "status": "done"},
      {"date": "2026-10-05", "time": "19:37", "name": "Minecraft heart charm keychains", "est": "30min", "status": "done"},
      {"date": "2026-10-05", "time": "15:44", "name": "Minecraft name sign", "est": "1.6h", "status": "done"},
      {"date": "2026-10-05", "time": "13:39", "name": "Minecraft Happy Birthday cake topper", "est": "1.8h", "status": "done"},
      {"date": "2026-10-05", "time": "13:05", "name": "Minecraft cake topper numbers", "est": "25min", "status": "done"},
      {"date": "2026-10-05", "time": "11:28", "name": "Minecraft name sign", "est": "55min", "status": "done"},
      {"date": "2026-09-10", "time": "07:35", "name": "Realistic iPhone model", "est": "3.3h", "status": "done"},
      {"date": "2026-09-10", "time": "07:31", "name": "Realistic iPhone model", "est": "4min", "status": "stopped"},
      {"date": "2026-09-09", "time": "21:15", "name": "Realistic iPhone model", "est": "3.3h", "status": "done"},
      {"date": "2026-09-09", "time": "14:21", "name": "Realistic iPhone model", "est": "3.3h", "status": "done"},
      {"date": "2026-08-30", "time": "10:08", "name": "Minecraft TNT keychains", "est": "10.3h", "status": "done"}
    ]
  },
  "journey": [
    {"when": "December 2024", "text": "A first look: an A1 mini sat in my Bambu Lab cart."},
    {"when": "April 11, 2026", "text": "I ordered a Bambu Lab P1S Combo: the printer and the AMS, which holds four spools and switches colors on its own."},
    {"when": "Spring and summer 2026", "text": "The shelf filled up: ZIRO, OVERTURE, iSANMATE and MarsWork, mostly from Amazon, one white from Michaels."},
    {"when": "August 30, 2026", "text": "The first print in my Bambu history: Minecraft TNT keychains, about ten hours on the plate.", "link": "#log", "link_text": "Every print since"},
    {"when": "October 2026", "text": "My busiest month so far: 33 prints, twelve of them plates of a Large Minecraft Steve."},
    {"when": "October 29, 2026", "text": "My longest print yet: mini howling wolves, about 43 hours."},
    {"when": "November 21, 2026", "text": "Claude turned the Friendly Hill friends and the Yeti into figures made for my four AMS slots, with no supports to snap off.", "link": "/figures/"},
    {"when": "November 21, 2026", "text": "Claude set up Bambu Studio on my iMac and sent Foxy to the printer: our first figure, about twelve hours on the plate."},
    {"when": "November 21, 2026", "text": "This page, with every spool on one shelf."}
  ]
}
